Supermicro SuperStorage SSG-6049SP-DE1CR60 User Manual page 109

The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer.
The options are Disabled and Enabled.
Trusted Computing (Available when a TPM device is installed

and detected by the BIOS)
When a TPM (Trusted-Platform Module) device is detected in your machine, the following
information will be displayed.
•
TPM2.0 Device Found
•
Firmware Version
•
Vendor
Security Device Support
If this feature and the TPM jumper (JPT1) on the motherboard are both enabled, the onboard
security (TPM) device will be enabled in the BIOS to enhance data integrity and system
security. Please note that the OS will not show the security device. Neither TCG EFI protocol
nor INT1A interaction will be made available for use. If you have made changes on the setting
on this item, be sure to reboot the system for the change to take effect. The options are
Disable and Enable.
*If the feature above is set to Enable, the following features will become available for
user's configuration:
The following Platform Configuration Register information will be displayed:
109
Chapter 6: UEFI BIOS