Supermicro SuperStorage SSG-6049SP-DE1CR60 User Manual page 129

Erasing Settings
Erase SEL
Select "Yes, On next reset" to erase all system event logs upon next system boot. Select
"Yes, On every reset" to erase all system event logs upon each system reboot. Select "No"
to keep all system event logs after each system reboot. The options are "No", "Yes, On next
reset", and "Yes, On every reset".
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are Do Nothing and Erase Immediately.
BMC Network Configuration
Update IPMI LAN Configuration
This feature allows the user to apply the settings listed below to IPMI at next system boot.
The options are Yes and No.
Configure IPv4 Support
•
IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is
Failover.
•
IPMI Network Link Status: This feature displays the IPMI Network Link status. The default
setting is Dedicated LAN.
•
Configuration Address Source (available when Update IPMI LAN Configuration is set to
Yes): Use this feature to select the IP address source for this computer. If Static is se-
lected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server attached to the network and request the next available IP
address for this computer. The options are DHCP and Static.
•
Station IP Address: This feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 172.31.41.69).
•
Subnet Mask: This feature displays the sub-network that this computer belongs to. The
value of each three-digit number separated by dots should not exceed 255.
•
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
129
Chapter 6: UEFI BIOS