Removing The Processor Heatsink Module From The Motherboard - Supermicro SuperStorage SSG-2029P-E1CR24H User Manual

Table of Contents

Advertisement

Removing the Processor Heatsink Module from the Motherboard

Before removing the processor heatsink module (PHM), power down as described in Section
3.1.
1. Using a T30 Torx-bit screwdriver, turn the screws on the PHM counterclockwise to
loosen them from the socket, starting with screw marked #4, in the sequence of 4, 3, 2,
1.
2. After all four screws are removed, wiggle the PHM gently and pull it up to remove it
from the socket.
#4
#1
Printed Triangle on Motherboard
Chapter 3: Maintenance and Component Installation
Removing the screws in
the sequence of 4, 3, 2, 1
#2
#3
32
CPU Socket
After removing the screws,
lift the Processor Heatsink
Module off the CPU socket.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superstorage ssg-2029p-e1cr24l

Table of Contents