Table of Contents
Advertisement
SuperStorage Server SSG-6049SP-DE1CR60/90 User's Manual
Universal Serial Bus (USB) Ports
There are two USB 3.0 ports (USB0/USB1) on the I/O back panel. USB2 is a Type A USB
3.0 header on the motherboard used to provide a front access USB connection.
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch and a rear UID LED (LE1) are located on the I/O back panel.
When you press the rear UID switch, the rear UID LED will be turned on. Press the UID
switch again to turn off the LED indicators. The UID indicators provide easy identification of
a system that may be in need of service. (Note: UID can also be triggered via IPMI on the
motherboard. For more information, please refer to the IPMI User's Guide posted on our
website at http://www.supermicro.com.)
UID Switch
Pin Definitions
Pin#
Definition
1
Ground
2
Ground
3
Button In
4
Button In
Additional I/O Ports
The following ports are located on the motherboard as headers.
VGA Port
One VGA port header is located at JVGA on the motherboard. Use this connection for VGA
display.
Serial Port
One COM port header is located at JCOM1 on the motherboard. The COM port provides
serial communication support.
Back Panel USB 0/1 (3.0)
Pin Definitions
Pin#
Definition
Pin#
A1
VBUS
B1
A2
D-
B2
A3
D+
B3
A4
GND
B4
A5
Stda_SSRX-
B5
A6
Stda_SSRX+
B6
A7
GND
B7
A8
Stda_SSTX-
B8
A9
Stda_SSTX+
B9
62
Definition
Power
USB_N
USB_P
GND
USB3_RN
USB3_RP
GND
USB3_TN
USB3_TP
UID LED
Pin Definitions
Color
Status
Blue: On
Unit Identified
Advertisement
Table of Contents
