Supermicro SuperStorage SSG-6049SP-DE1CR60 User Manual page 100

SuperStorage Server SSG-6049SP-DE1CR60/90 User's Manual
NVMe Firmware Source
This feature determines which type of the NVMe firmware should be used in your system.
The options are Vendor Defined Firmware and AMI Native Support.
VGA Priority
Use this feature to select the graphics device to be used as the primary video display for
system boot. The options are Onboard and Offboard.
M.2-P PCI-E 3.0 x4 OPROM/M.2-P PCI-E 3.0 x2 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the PCI-E slot specified by the user. Select Legacy to allow the user to
boot the computer using a legacy device installed on the PCI-E slot specified by the user.
The options are Disabled, Legacy and EFI.
CPU1 Slot 1 PCI-E 3.0 x8 OPROM/CPU2 Slot 2 PCI-E 3.0 x16 OPROM/CPU1 Slot 3
PCI-E 3.0 x8 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the PCI-E slot specified by the user. Select Legacy to allow the user to
boot the computer using a legacy device installed on the PCI-E slot specified by the user. The
options are Disabled, Legacy and EFI. (Note: Riser card names may differ in each system.)
CPU1 2x on AOM PCIe 3.0 x4 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the PCI-E slot specified by the user. Select Legacy to allow the user to
boot the computer using a legacy device installed on the PCI-E slot specified by the user.
The options are Disabled, Legacy and EFI.
CPU1 SAS on AOM PCIe 3.0 x16 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the PCI-E slot specified by the user. Select Legacy to allow the user to
boot the computer using a legacy device installed on the PCI-E slot specified by the user.
The options are Disabled, Legacy and EFI.
CPU2 AOM NTB for SBB PCI-E 3.0 x16 OPROM
Select EFI to allow the user to boot the computer using an EFI (Extensible Firmware Interface)
device installed on the PCI-E slot specified by the user. Select Legacy to allow the user to
boot the computer using a legacy device installed on the PCI-E slot specified by the user.
The options are Disabled, Legacy and EFI.
100