Supermicro SuperStorage SSG-6049SP-DE1CR60 User Manual page 79

LLC Prefetch
Select Enable to support the LLC prefetch on all threads. The options are Disable and Enable.
Extended APIC (Extended Advanced Programmable Interrupt Controller)
Select Enable to use the extended APIC (Advanced Programmable Interrupt Control) support
to enhance power management. The options are Disable and Enable.
AES-NI
Select Enable to use the Intel® Advanced Encryption Standard (AES) New Instructions (NI)
to ensure data security. The options are Disable and Enable.
Advanced Power Management Configuration
Power Technology
Select Energy Efficient to support power-saving mode. Select Custom to customize system
power settings. Select Disabled to disable power-saving settings. The options are Disable,
Energy Efficient, and Custom.
Power Performance Tuning (Available when "Power Technology" is set to Custom)
Select BIOS to allow the system BIOS to configure the Power-Performance Tuning Bias
setting. The options are BIOS Controls EPB and OS Controls EPB.
ENERGY_PERF_BIAS_CFG Mode (ENERGY PERFORMANCE BIAS
CONFIGURATION Mode) (Available when "Power Performance Tuning" is set to
BIOS Controls EPB)
Use this feature to configure the optimal operation setting for your machine by achieving
the desired system performance level and energy saving (efficiency) level at the same
time. Select Maximum Performance to maximize system performance to its highest
potential; however, this may consume maximal amount of power as energy is needed to
fuel the processor frequency. (In other words, system performance is gained at the cost of
system power efficiency, depending on the workload.) Select Maximum Power Efficiency
to minimize power use; however, system performance will be greatly impacted as the
result of power saving. The options are Maximum Performance, Performance, Balanced
Performance, Balanced Power and Power.
CPU P State Control (Available when "Power Technology" is set to
Custom)
SpeedStep (P-States)
EIST (Enhanced Intel® SpeedStep™ Technology) allows the system to automatically adjust
processor voltage and core frequency to reduce power consumption and heat dissipation.
The options are Disable and Enable.
79
Chapter 6: UEFI BIOS