Removing A Secondary 3.5-Inch Hard Drive - HP EliteDesk 705 G3 Small Form Factor Maintenance And Service Manual

7. Connect the power cable (1) and data cable (2) to the rear of the hard drive.
NOTE:
system board labeled SATA0 to avoid any hard drive performance problems.

Removing a secondary 3.5-inch hard drive

1. Prepare the computer for disassembly
2. Remove the access panel
3. Rotate the drive cage to its upright position.
The data cable for the primary hard drive must be connected to the dark blue connector on the
(Access panel on page
(Preparation for disassembly on page
19).
18).
Drives 39