Table of Contents
Advertisement
Using the Small Form Factor Computer in a Tower Orientation
The Small Form Factor computer can be used in a tower orientation. The HP logo plate on the front bezel is
adjustable for either desktop or tower orientation.
1.
Prepare the computer for disassembly
2.
Orient the computer so that its right side is facing down and place the computer in the optional stand.
NOTE:
stand.
3.
Reconnect the power cord and any external devices, and then turn on the computer.
NOTE:
and free of obstructions.
4.
Lock any security devices that were disengaged when the access panel was removed.
To stabilize the computer in a tower orientation, HP recommends the use of the optional tower
Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains clear
(Preparation for disassembly on page
Using the Small Form Factor Computer in a Tower Orientation
18).
65
Advertisement
Table of Contents
Need help?
Do you have a question about the EliteDesk 705 G3 Small Form Factor and is the answer not in the manual?