Removing A 2.5-Inch Hard Drive - HP EliteDesk 705 G3 Small Form Factor Maintenance And Service Manual

6. Rotate the drive cage back down to its normal position.
CAUTION:

Removing a 2.5-inch hard drive

1. Prepare the computer for disassembly
2. Remove the access panel
3. Rotate the drive cage to its upright position.
42 Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis
Be careful not to pinch any cables or wires when rotating the drive cage down.
(Access panel on page
(Preparation for disassembly on page
19).
18).