Removing A Secondary 3.5-Inch Hard Drive - HP ProDesk 600 G2 Hardware Reference Manual

Removing a secondary 3.5-inch hard drive

1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as compact discs or USB flash drives, from the computer.
3. Turn off the computer properly through the operating system, then turn off any external devices.
4. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to
the internal components of the computer.
5. If the computer is on a stand, remove the computer from the stand.
6. Remove the computer access panel.
7. Rotate the drive cage to its upright position.
28 Chapter 2 Hardware upgrades
Regardless of the power-on state, voltage is always present on the system board as long as