Nexcom 912P User Manual page 39

Chapter 3: BIOS Setup
ACPI Settings
This section is used to configure ACPI settings.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Main
Advanced Chipset PCIPnP
ACPI Settings
Enable Hibernation [Enabled]
ACPI Sleep State [S3 (Suspend to RAM)]
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Enable Hibernation
Enables or disables system ability to hibernate (OS/S4 Sleep State). This
option may not be effective with some OS.
ACPI Sleep State
Select the highest ACPI sleep state the system will enter when the suspend
button is pressed.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Exit
Security
Enables or disables system ability
to hibernate (OS/S4 Sleep State).
This option may not be effective
with some OS.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NCT6791D Super IO Configuration
This section is used to configure serial ports 1 and 2 of the super IO.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
NCT6791D Super IO Configuration
Super IO Chip
Serial Port 1 Configuration

Serial Port 2 Configuration

Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Super IO Chip
Displays the Super I/O chip used on the board.
25
Set Parameters of Serial Port
1 (COMA)
NCT6791D
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 912P User Manual