6 CONTROLS
6.21.5
6.21.6
22
S04361-01
Setting the clock
S04363-01
S04367-01
Setting the service interval
S04375-01
–
Press and hold both buttons for 3 – 5 seconds.
The Setup menu is displayed.
–
Press the + button repeatedly until kmor mp flashes on the
indicator.
–
Press the ‑ button to change from km to mp or from mp to km.
–
Press the + button.
The settings are adopted and the setup menu is closed.
Condition
The motorcycle is stationary.
–
Press the + or ‑ button until the indicator CLK appears in the
combination instrument.
–
Press and hold the ‑ button for 3-5 seconds.
The combination instrument switches to the clock setting
mode.
–
Press the ‑ button to select the 24 h display or 12 h display
for the clock.
–
Confirm the selection using the + button.
The setting is adopted and the combination instrument
changes to the next menu item.
–
Press the ‑ button to set the hour.
–
Confirm the selection using the + button.
The setting is adopted and the combination instrument
changes to the next menu item.
–
Press the ‑ button to set the minute.
–
Confirm the selection using the + button.
The setting is adopted and the setting mode is closed.
Condition
The motorcycle is stationary.
–
Press the + or ‑ button repeatedly until SER is shown on the
combination instrument.
–
Press the ‑ button repeatedly until the service interval display
starts flashing.
–
Press the ‑ button repeatedly until the desired service interval
is displayed.
Info
The indicator can be set within the range of 500 to
10,000.
–
Press and hold the ‑ button for 3–5 seconds until the indicator
is no longer flashing.