Samtec22 To Hstcu (Usb-C) Converter - TASKING iSYSTEM Infineon AGBT User Manual

Samtec22 to HSTCU (USB-C) Converter

This converter is used to connect
TriBoards with HSTCU (High Speed Tool Connector USB-C). It must be ordered separately.
When attaching this converter to the Active Probe, make sure its marking A and marking B is
aligned and matches with the markings on the Active Probe connector.
The following pinout is valid on the converter side:
Signal Direction Signal
Description
I AGBT TX0_P
I AGBT TX0_N
O Ground
AGBT TX0_P
AGBT TX_N
Ground
Not Connected
Not Connected
Ground
Not Connected
Not Connected
Ordering code
Infineon AGBT Active Probe
Signal Pin
TX0+ 1
TX0- 3
GND 5
TX1+ 7
TX1- 9
GND 11
NC 13
NC 15
GND 17
NC 19
NC 21
22-pin Aurora pinout
IASAM22-HSTCU
(Ordering code: IC57164) to the
Pin Signal
2 Vref
4 DAP0
6 DAP1
8 DAP3
10 DAP2
12 nTRST/DAPEN
14 CLK+
16 CLK-
18 NC
20 NC
22 nRESET
Signal Signal Direction
Description
Reference I
Voltage
DAP clock O
DAP Data pin IO
Optional 3rd IO
Data pin
Optional 2nd IO
Data pin
Output O
AGBT Clock O
AGBT Clock O
Not Connected
Not Connected
Target Reset IO
Pin