Installing The Fork Protector; Removing The Fork Legs - Husqvarna TC 65 2022 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.6
11.7
42
S01483-10

Installing the fork protector

S01483-11
S01482-11

Removing the fork legs

S01484-10
–
3
Remove screws on the right fork leg. Take off the fork
protector.
–
Position the fork protector on the right fork leg. Mount and
1
tighten screws .
Guideline
Remaining screws,
chassis
–
Position the fork protector on left fork leg. Mount and tighten
2
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
3
screws .
Guideline
Screw, brake line
holder
Clamp the brake line only via the metal bushing.
Make sure that the upper edge of the bushing is as flush as
possible with the bracket.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not kink the brake line.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
EJOT 1.7 Nm (1.25 lbf ft)
p. 40)
( p. 86)