12 Brake System; Checking The Free Travel Of The Hand Brake Lever; Adjusting The Basic Position Of The Hand Brake Lever; Checking The Brake Discs - Husqvarna TC 65 2022 Owner's Manual

12 BRAKE SYSTEM

12.1
12.2
12.3
72

Checking the free travel of the hand brake lever

Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit.
–
Set the free travel on the hand brake lever in accordance with the specification.
F03098-13

Adjusting the basic position of the hand brake lever

F03098-12

Checking the brake discs

Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized Husqvarna Motor-
cycles workshop will be glad to help.)
–
Push the hand brake lever forward and check free travel
Free travel of hand brake
lever
» If the free travel does not match the specification:
–
Adjust the basic position of the hand brake lever.
( p. 72)
–
Check the free travel of the hand brake lever. (
–
Adjust the basic position of the hand brake lever using
1
adjusting screw .
Info
Turn the adjusting screw clockwise to increase the
distance between the hand brake lever and the han-
dlebar.
Turn the adjusting screw counterclockwise to
decrease the distance between the hand brake lever
and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not
apply any force.
Do not make any adjustments while riding.
A
.
≥ 3 mm (≥ 0.12 in)
p. 72)