Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - Husqvarna TC 65 2022 Owner's Manual

11.41

Checking the frame

11.42

Checking the link fork

11.43

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
SERVICE WORK ON THE CHASSIS 11
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deforma-
tion:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
601599-01
–
Check the link fork for damage, cracks, and deformation.
» If the link fork shows signs of damage, cracks, or defor-
mation:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
V00216-01
Preparatory work
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the left side cover. (
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
The throttle cable must be routed behind the handlebar,
behind the coolant hose and on the left of the frame.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
V02029-01
Finishing work
–
Install the fuel tank.
–
Install the right side cover. (
–
Install the left side cover. (
p. 55)
p. 50)
p. 52)
( p. 59)
( p. 61)
p. 51)
p. 53)
67