Adjusting The Fork Air Pressure - Husqvarna TC 65 2022 Owner's Manual

10.13

Adjusting the fork air pressure

Warning
Danger of accidents Modifications to the suspension setting may seriously alter the handling charac-
teristic.
Extreme modifications to the suspension setting may cause a serious deterioration in the handling
characteristic and overload components.
–
Only make adjustments within the recommended range.
–
Make sure your child rides slowly to start with after making adjustments in order that he or she can
assess the new handling characteristic.
Info
Check or adjust the air pressure under the same conditions at the earliest 5 minutes after switching off
the engine.
The air suspension is located in the left fork leg. The rebound damping is located in the right fork leg.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove protection cap
–
Push together fork airpump
Fork airpump (79412966100)
Info
The fork airpump is included as part of the motorcy-
cle's accessory pack.
F02245-10
–
Connect the fork airpump to the left fork leg.
The fork airpump switches on automatically.
A little air escapes from the fork leg when connecting.
Info
This is due to the volume of the hose and not due to a
defect in the fork airpump or the fork.
Observe the accompanying instructions for Husq-
varna Motorcycles technical accessories.
–
Adjust the air pressure as specified.
Guideline
Air pressure
Gradual changing of the air
pressure in steps of
Minimum air pressure
Maximum air pressure
Info
Never adjust the air pressure to a value outside the
stated range.
–
Disconnect the fork airpump from the left fork leg.
TUNING THE CHASSIS 10
p. 40)
1
.
2
fully.
3 bar (44 psi)
0.2 bar (3 psi)
1.4 bar (20 psi)
4 bar (58 psi)
37