Sprocket, Shaft Sleeve, Shaft Sleeve Bearing; Disassembling Rear Sprocket; Installing Rear Sprocket - Benelli TNT125 Maintenance Manual

Sprocket, Shaft Sleeve, Shaft Sleeve Bearing

Disassembling Rear Sprocket

●Disassembling rear wheel (see "Wheel /
Tire"—"Disassembling Rear Wheel").
Note
Do not place the wheel on the ground
horizontally and make the brake disc towards,
otherwise, brake disc may be damaged or
deformed. Please place wood blocks below wheel,
to prevent brake disc from contacting the ground.
●Disassemble:
Rear sprocket nut [A],
Rear sprocket [B]

Installing Rear Sprocket

●When installing the sprocket, the side with the sign of
number of teeth [A] should be towards the outside.
●Lock rear sprocket nut.
Locking Torque of Rear Sprocket Nut: 45N·m
●Install rear wheel (see "Wheel / Tire"—"Installing
Rear Wheel").
* Note
Fasten the nut in order.
- 306 -