Replacing Oil - Benelli TNT125 Maintenance Manual

Replacing oil

●After the engine becomes hot, place the motorcycle
vertically and make it be perpendicular to the ground.
●Remove the oil drain bolt [A] to discharge the oil.
○Place an appropriate container under the oil drain bolt
[A] to collect the oil.
●Drain: oil in the crankcase.
●Tighten the oil drain bolt.
Tightening torque of oil drain bolt: 25-28 N·m
●Open the oil filler cap [A]
●Pour the oil of the specified type according to the
specified quantity.
- 98 -