Wheel/Tire; Checking Tire Pressure; Checking Whether Wheel/Tire Is Broken - Benelli TNT125 Maintenance Manual

Wheel/Tire

Checking Tire Pressure

●Remove the valve cap.
●Measure the tire pressure with an air pressure gauge
[A] when the tire is cooled .
●Reinstall the valve cap back.
★If necessary, adjust the tire pressure according to the
relevant specifications.
Pressure (when the tire is cooled)
Front wheel: 190±10 kPa
Rear wheel: 210±10 kPa

Checking Whether Wheel/Tire is Broken

●Clear the stones [A] or other foreign matters
embedded on the thread.
●Visually check whether there are crack [B], notch [C]
and nail [D] on the tire and replace the tire if necessary.
If the tire expands or protrudes, the inside is damaged
and the tire needs to be replaced.
●Visually check whether there are crack, notch and
dent on the wheel.
★If any damage is found, replace the wheel according
to the situations.
- 65 -