Cable Connector Check; Disconnection; Check - Benelli TNT125 Maintenance Manual

Cable Connector Check

Make sure that there are no corrosion, moisture
and other foreign matters on the connector.

1. Disconnection

Wire

Connector

Joint


2. Check

Wire

Connector

Joint

If there are moisture traces, use the compressed air
to dry it.
If there is corrosion, plug the connection parts for
several times or use the rust remover, and replace
the parts with serious corrosion timely.

3. Check

All connectors

If any joint is loose, conduct correct connection

again.
Note
If the "A" pin on the terminal is flat, please bend it.
- 28 -