Installatation Of Fuel Tank - Benelli TNT125 Maintenance Manual

Installatation of fuel tank

●Conduct installation in the reverse order of
"disassembly"
Note
Do not damage the mounting surface of fuel tank
when installing the fuel pump;
Use new fuel pump seals;
Use new fuel level sensor seals.
Torque value:
Oil level sensor tightening nut tightening torque: 6
N•m
Fuel pump mounting bolt tightening torque: 4 N*m
Fuel tank mounting bolt tightening torque: 10 N*m
Conduct installation as shown in the figure
Install the connector of fuel pump in the direction of
arrow
Lock the fuel pump screw in the correct locking order
as shown in the figure
- 140 -