Figure 2 Turning On the
Library
Removing Tape Drive
0
SCSI Cables
Power button
Each pair of tape drives within the library are connected via a SCSI cable.
These cables must be removed prior to cabling the TC2201.
1 Locate the SCSI cables connecting each pair of tape drives in the library
and the host systems (see
figure 5
for PX510). The tape drives are numbered 1 through 10
(depending on library model) starting in the top-right drive bay. Tape
drive 1 is in the upper right-hand drive bay, tape drive 2 is in the upper
left-hand drive bay, and so forth. Refer to the following illustrations for
exact tape drive numbering.
TC2201 Upgrade Procedure
Quantum PX500 Series TC2201 Upgrade Instructions
figure 3
for PX502,
figure 4
81-81538-01 A01
December 2005
OCP
for PX506, and
5