Quantum PX500 Series Upgrade Instructions page 22

Quantum PX500 Series TC2201 Upgrade Instructions
81-81538-01 A01
December 2005
Figure 19 iSCSI Mapping
Screen
22
After the iSCSI port has been selected, mapping information for that port is
displayed including the name of the port, the currently selected host and
map. The following options are also available:
• Add a new host or map by selecting the respective
• Select an existing host or map from the pull-down lists for
.
Select Map
• Delete the currently selected host or map by selecting the respective
button.
Delete
• View or Edit the currently selected host or map by selecting the respective
button.
Edit/View
• Clone (via the
Clone Map
the name of the new cloned map. This option makes it easier to setup new
maps with similar information to previously created maps. Auto
Assigned maps cannot be cloned.
• Select the
Activate Mapping Changes
current map without rebooting the TC2201. These changes are made
effective immediately after being submitted.
Before activating any port mapping changes, it is strongly
Caution:
recommended that the user verify there are not any
command or data operations occurring in conjunction
with devices affected by the mapping changes. For
example, deleting a LUN or device from a map may
disrupt I/O transfers with that device. It is the user's
responsibility to ensure that no operations will be
negatively impacted due to the activation of mapping
changes.
TC2201 Upgrade Procedure
button) the currently selected map and set up
button to dynamically update the
button.
Add
and
Select Host