Quantum PX500 Series TC2201 Upgrade Instructions
81-81538-01 A01
December 2005
Figure 21 FTP Utilities
Screen
24
The FTP utility requires the use of a JAVA applet and prompts for permission
to install the applet, if needed. If the prompt is displayed, follow the onscreen
instructions to complete the installation. The FTP utility then prompts for
permission to run the applet.
Internet access is required to verify the signature for the FTP
Note:
applet and to download the JAVA applet plug-in for your
browser.
2 Enter the User Name, Password, and the IP address of the Interface
Controller and click
3 Select the local file to download. If necessary, click
through a file list.
The configuration file should be named <
Note:
when typing it into the FTP window.
The following file types can be downloaded from the Interface Controller:
•
Configuration (.cfg)
•
Traces for the current boot cycle (curtrace.txt)
•
Traces from the previous boot cycle (prvtrace.txt)
4 Click
Binary Transfer
5 To download a file, click
The configuration file is saved to the local host.
TC2201 Upgrade Procedure
.
Connect
mode.
.
Get from Rtr
to scroll
Browse
>
myconfigfile.cfg