Figure 9 Seating the
TC2201 Bridge
Figure 10 Securing the
TC2201 Bridge
Ejector latches
PX502 shown
4 Secure each bridge to the CPCI card cage by tightening the captive screws
located in the ejector latches with a PHILLIPS screw driver (see
Captive screws
PX502 shown
5 Repeat
step 2
through
using the next available card cage slot.
TC2201 Upgrade Procedure
Quantum PX500 Series TC2201 Upgrade Instructions
Ejector latches in
locked position
step 4
for additional TC2201 bridges if necessary,
81-81538-01 A01
December 2005
figure
10).
11