Figure 20 System Reboot
Screen
Saving the
0
Configuration File
All current Mapping Settings will take effect immediately! If
Note:
another management interface has made unsaved mapping
changes, those changes will be lost.
If the
Note:
Activate Mapping Changes
mapping changes will not take effect unless the TC2201E is
rebooted.
6 After activating the mapping options for the Ethernet ports, click
from the
menu.
Main
The
System Reboot
7 Select
and click
Yes
The TC2201 reboots.
After the TC2201 initial installation and configuration or after any changes
are made to the TC2201, you must save the configuration file to a local host.
The configuration file contains all configurable parameters such as IP address
and mapping information. This configuration file can be uploaded to a
replacement TC2201 bridge and eliminate the configuration portion of this
instruction.
To save a configuration file using the FTP utility:
1 Click
from the
FTP Utility
The
screen displays (see
FTP Utility
TC2201 Upgrade Procedure
Quantum PX500 Series TC2201 Upgrade Instructions
button is not selected, the
screen displays (see
figure
.
Submit
menu.
Utilities
figure
21).
81-81538-01 A01
December 2005
Reboot
20).
23