Quantum PX500 Series Upgrade Instructions page 21

Figure 18 SCSI Bus
Screen
SCSI ID 7 is the default SCSI Initiator ID for each of the TC2201's SCSI
buses. If any devices attached to a TC2201 bus are using SCSI ID 7, then
that bus's Initiator ID must be changed. To change a bus's Initiator ID:
Select the desired bus from the TC2201 GUI or the SCSI Bus submenu.
Then use the Initiator ID field drop-down list to select an unused ID
number. Click the
Submit
If the TC2201 does not see all of the devices expected, check that the
initiator ID(s) are set to a unique value for each bus attached to devices.
For any changes, submit those changes and reboot the TC2201.
5 Click from the
iSCSI Mapping
The screen displays (see
iSCSI Mapping
TC2201 Upgrade Procedure
Quantum PX500 Series TC2201 Upgrade Instructions
button to record the change.
menu.
Main
figure 19).
81-81538-01 A01
December 2005
21