Figure 22. Lto-1 And Lto-2 Drive Worm Gear - Certance LTO 1 User Manual

Troubleshooting Guide

Figure 22. LTO-1 and LTO-2 Drive Worm Gear

3. Continue turning the worm gear until the cartridge is sticking out of the unit approximately 17
mm (0.66"). Then carefully pull the cartridge out by hand.
4. After you have removed the cartridge, put the top cover back on the drive; then replace and
tighten the screws.
Return the drive to Certance.
5.
CAUTION: Do NOT use the drive after you have removed a cartridge. The drive must be
returned to Certance for servicing.
If you have any questions about this procedure, contact Technical Support.
Manually Removing a Cartridge
78