Certance LTO 1 User Manual page 14

Installation (and Quick Start)
❑
6.
❑
7.
❑
8.
❑
9.
❑
10.
Internal LTO-1 Fibre Channel Tape Drive Quick Start
Use the following procedure to install an internal LTO-1 Fibre Channel tape drive. Print this page and
check each step as you complete it. If you need more information about a step, turn to the section
referenced in the step.
❑
1.
❑
2.
❑
3.
❑
4.
❑
5.
❑
6.
❑
7.
❑
8.
❑
9.
Connect a serial cable, if connecting the tape drive to a tape library.
See "Connecting a Serial Cable for Tape Libraries" on page 21.
Connect a power cable to the drive.
See "Connecting a Power Cable" on page 22.
Replace the computer covers and power cable, turn on the computer, and verify that the
internal tape drive is operating properly.
If you intend to use your drive with
Windows 2000, install the appropriate LTO driver.
See "Installing the LTO Driver" on page 22.
Register your tape drive.
See "Registering Your Tape Drive" on page 22.
Unpack the contents of your drive package, and check for damaged items.
See "Unpacking and Inspection" on page 15.
Review the drive's default settings and change them if necessary:
• Loop ID: 0000000
See"Configuring the Internal Fibre Channel Drive" on page 23.
Turn off your computer, remove its covers and power cable, and select a mounting bay for
the drive.
See "Mounting the Internal FC Drive" on page 24.
Connect a Fibre Channel LC interface cable to the drive.
See "Connecting a Fibre Channel Cable" on page 25.
Connect a serial cable, if connecting the tape drive to a tape library.
See "Connecting a Serial Cable for Tape Libraries" on page 26.
Connect a power cable to the drive.
See "Connecting a Power Cable" on page 27.
Replace the computer covers and power cable, turn on the computer, and verify that the
internal tape drive is operating properly.
If you intend to use your drive with Microsoft Windows Server 2003, Windows XP, or
Windows 2000, install the appropriate LTO driver.
See "Installing the LTO Driver" on page 27.
Register your tape drive.
See "Registering Your Tape Drive" on page 27.
Microsoft Windows Server 2003
Quick Start Guide
, Windows XP, or
14