Certance LTO 1 User Manual page 3

Warnings
All safety and operating instructions should be read before this product is operated, and should be retained for
future reference. This unit has been engineered and manufactured to assure your personal safety. Improper use
can result in potential electrical shock or fire hazards. In order not to defeat the safeguards, observe the follow-
ing basic rules for installation, use and servicing.
CAUTION: This symbol should alert the user to the presence of "dangerous voltage" inside the
product that might cause harm or electric shock.
Caution! Risk of electric shock! Do not open!
To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts
are inside. Refer servicing to qualified service personnel.
Heed warnings — All warnings on the product and in the operating instructions should be adhered to.
•
Follow instructions — All operating and use instructions should be followed.
•
Ventilation — The product should be situated so that its location or position does not interfere with proper
•
ventilation.
Heat — The product should be situated away from heat sources such as radiators, heat registers, fur-
•
naces, or other heat producing appliances.
Power sources — The product should be connected to a power source only of the type directed in this
•
document or as marked on the product.
Power cord protection — The power cord should be routed so that it is not likely to be walked on or
•
pinched by items placed upon or against it, paying particular attention to the cord at the wall receptacle,
and the point where the cord exits from the product.
To complete the disconnection of the electricity, please remove the power (electric) cord and the SCSI
•
cable from their connections in the back of the product. The plugs should be placed near the product for
easy access.
Object and liquid entry — Care should be taken to insure that objects do not fall and liquids are not
•
spilled into the product's enclosure through openings.
Servicing — The user should not attempt to service the product beyond that described in the operating
•
instructions. All other servicing should be referred to qualified service personnel.