Installation (and Quick Start)
Table 5. Serial Interface Connector Pin Assignments (Continued)
Pin Numbers
8
9 through 18
Connecting a Power Cable
Attach a four-pin power cable to the power connector on the back of the drive. Figure 13 on
page 27 shows the location of the power connector on internal LTO-1 FC drive. The recommended
4-pin power connector is an AMP 1-48024-0 housing, with AMP 60617-1 pins or equivalent.
Figure 13. Power Connector on the Back of the Internal LTO-1 FC Drive
Installing the LTO Driver
If you intend to use your drive with the Microsoft Windows Server 2003, Windows XP, or Microsoft
Windows 2000 operating system, install the LTO-1 FC driver. See the Tape Resource CD. This driver
is not necessary with commercial backup application software.
Registering Your Tape Drive
After you install the internal FC tape drive, be sure to register it. Registering your drive ensures that
you will receive the latest information about your drive, as well as other product, service, and sup-
port information. For your convenience, you can register your drive either through our Web site or
by fax.
If you have an Internet connection, please visit www.certance.com and select "Product
•
Registration" from the "Products" menu.
If you do not have an Internet connection, complete the Registration Card included with your
•
package and either mail or fax it to the address or fax number on the Card.
Description
Lib RXp (input to drive, receive positive)
Reserved (do not use)
Installing an Internal LTO-1 Fibre Channel Drive
27