Figure 7. Scsi Termination Examples For The Desktop Lto-2 Half-Height Tape Drive; Connecting A Power Cord - Certance LTO-2 Online User's Manual

Installation (and Quick Start)
mm (0.085 in) apart. Either connector can be used as a SCSI IN or SCSI OUT connection. This
means you can use either connector to attach the drive to a host computer or to another SCSI device.
Turn off all power to the drive and the computer.
1.
2. Attach the SCSI interface cable to one of the 68-pin SCSI interface connectors on the back of
the drive.
Checking the SCSI Termination
If the desktop LTO-2 half-height drive is the last or only device in a SCSI chain, install a 68-pin LVD
terminating plug on the unused SCSI connector. See Figure 7 on page 23 for two SCSI termination
examples.
NOTE: Termination power is enabled as a default for desktop drives.
External
Tape Drive
External
SCSI device
SCSI Controller
(termination enabled)
Example 1: SCSI termination
in a system that has only
external SCSI devices.

Figure 7. SCSI Termination Examples for the Desktop LTO-2 Half-Height Tape Drive

Connecting a Power Cord

Attach the power cord securely to the power connector on the back of the desktop LTO-2 half-height
drive.
SCSI Terminators
Example 2: SCSI termination
in a system that has both
internal and external SCSI
devices.
Installing a Desktop LTO-2 Half-Height Drive
External
SCSI device
External
Tape Drive
SCSI Controller
(termination disabled)
Internal
SCSI device
( termination
enabled )
23