Drive Performance Specifications; Table 11. Drive Performance Specifications - Certance LTO 1 User Manual

Specifications
Table 10. Power Dissipation (Continued)
Specification
Max Peak Operating Power
Ultra2 SCSI LVD; Ultra SCSI HVD
Fibre Channel
* RMS parameters measured at the power connector using a true RMS digital meter.

Drive Performance Specifications

Table 11 on page 48 lists the performance specifications for the LTO-1 and LTO-2 drives.

Table 11. Drive Performance Specifications

Specification
Capacity
LTO-2 (609 m)
LTO-1
Ultrium type A (609 m)
Ultrium type B (319 m)
Ultrium type C (203 m)
Ultrium type D (87 m)
Recording density
Flux density
Track density
Error recovery
Recording unrecoverable errors
Recording undetectable errors
Tape drive type
Head configuration
Recording format
Recording method
Transfer rate (sustained)
Synchronous transfer rate (burst)
LTO-1
48.5 watts RMS (1 sec max)
58.5 watts RMS*
Value
200 Gbytes (native)
100 Gbytes (native)
50 Gbytes (native)
30 Gbytes (native)
10 Gbytes (native)
LTO-1: 3,660 RLL-encoded ONEs per mm
LTO-2: 3,930 RLL-encoded ONEs per mm
3,660 flux transitions per mm
3 tracks per mm
Read-after-write Reed Solomon ECC (2 levels)
17
<1 in 10 data bits
27
< 1 in 10 data bits
LTO (Ultrium)
16 thin-film write heads
16 MR read heads
8 MR servo heads
During operation 8 write heads, 8 read heads, and 2 servo
heads are active at the same
Ultrium 8-channel (U-18)
LTO-1: (1,7) RLL
LTO-2: 0, 13/11 RLL
LTO-1: 16.137 Mbytes/second (max, native)
LTO-2: 34,000 Mbytes/second (max, native)
LTO-1: 80 Mbytes per sec max
LTO-2: 160 Mbytes per sec max
Drive Performance Specifications
LTO-2
65 watts RMS (1 sec max)
N/A
48