Connecting A Power Cord - Certance LTO 1 User Manual

Installation (and Quick Start)

Connecting a Power Cord

Attach the power cord securely to the power connector on the back of the desktop LTO-1 or LTO-2
drive (see Figure 14 on page 28).
Installing the LTO Driver
If you intend to use your drive with either the Microsoft Windows Server 2003, Windows XP, or
Microsoft Windows 2000 operating system, install the LTO driver. See the Tape Resource CD. This
driver is not necessary with commercial backup application software.
Registering Your Tape Drive
After you install the desktop tape drive, be sure to register it. Registering your drive ensures that you
will receive the latest information about your drive, as well as other product, service, and support
information. For your convenience, you can register your drive either through our Web site or by
fax.
If you have an Internet connection, please visit www.certance.com and select "Product
•
Registration" from the "Products" menu.
If you do not have an Internet connection, complete the Registration Card included with your
•
package and either mail or fax it to the address or fax number on the Card.
Installing a Desktop Drive
30