Connection To A Plc System; Operating System Windows Embedded Ce 6.0 Prof; General - YASKAWA VIPA 62K-JEE0 Manual

Deployment Touch Panel
Operating system WindowsÒ Embedded CE 6.0 Prof. > General

3.3 Connection to a PLC system

Overview
3.4 Operating system Windows

3.4.1 General

32
For the inclusion into your PLC system several HMI/SCADA project-
engineering platforms are at your disposal that has to be installed at
an external PC. Here you may create your project, where appropriate
simulate it and transfer it to the Touch Panel via a connection that
you've entered before. Via the at the Touch Panel pre-installed run-
time version of the HMI/SCADA project engineering platforms your
project is run able.
By using the according communication driver, the Touch Panel sup-
ports connecting options to the PLC via field bus and Ethernet.
During operation your operating device communicates with the
according PLC and reacts to the application courses in the PLC
according to the configured processes. Via dialogues configured
before, process values may be monitored graphically, altered and
evaluated.
Ò
Embedded CE 6.0 Prof.
The newly developed standard Windows
communicating with each other to exchange information with Win-
dows® based devices and to establish connections to the Internet.
Ò
Microsoft Windows CE is a 32bit, open and scalable platform for a
multiplicity of communication and data processing devices. The func-
tions like multi-tasking and multi-threading are supported by this oper-
ating system.
VIPA HMI Touch Panel
Ò
CE allows devices that are
HB160 | TP | 62K-JEE0 | GB | 14-38