Connections - Miller Dynasty 210 Owner's Manual

5-4. Connections

Dynasty Front Panel
1
3
Tools Needed:
.
A complete Parts List is available at www.MillerWelds.com
Rear Panel
8
2
4
Maxstar Front Panel
1
9
5
7
6
2
10
!
Turn off power before con-
necting to weld output termi-
nals.
!
Do not use worn, damaged,
undersized, or repaired
cables.
Dynasty Connections
1 Remote Control Receptacle
(See Section 5-10)
2 Gas Out To Torch Connection
Requires an 11/16 in. wrench.
3 Work Lead Connection
4 TIG Torch Or Stick Electrode
Holder Connection
5 Main Power Switch
Use switch to energize/de-ener-
gize machine.
6 Optional Coolmate 1.3
Dedicated Power Supply
Receptacle (Dynasty Only)
7 Supplementary Protector For
Coolmate 1.3 Dedicated
Power Supply
Included with optional dedicated
Coolmate 1.3 power supply recep-
tacle (Dynasty only).
8 Gas In Connection
Fitting has 5/8-18 in. right hand
threads, and usually requires an
11/16 in. wrench. Maximum psi is
125. (Not included with Maxstar
STR models.)
9 Work Lead Connection For
TIG Welding. Stick Electrode
Holder Connection For Stick
Welding
10 TIG Torch Connection For
TIG Welding / Work Lead
Connection For Stick Welding
Ref. 805496-A
OM-270536 Page 21