Stick Welding Connections - Miller Multimatic 220 Owner's Manual

5-8.

Stick Welding Connections

3
4
�
Complete Parts List is available at www.MillerWelds.com
Turn off unit and disconnect input
power before making connections.
Do not use worn, damaged, under-
sized, or repaired cables.
1 Weld Output Receptacle
2 Work Clamp Receptacle
3 Stick Electrode Holder And Cable
4 Work Clamp And Cable
Connect stick electrode holder cable to the
electrode output receptacle, and connect
work clamp to work output receptacle. Turn
connectors clockwise.
Ensure all connections are tight.
1
2
Ref. 282724A
OM-281426 Page 23