Accessing Control Panel Menu: Dc Stick - Miller Dynasty 210 Owner's Manual

9-3. Accessing Control Panel Menu: DC Stick

2
Schedule 1
LIFT ARC
Schedule 1
DIG
.
A complete Parts List is available at www.MillerWelds.com
4
3
110A
Schedule 2
LIFT ARC
Schedule 2
Or
110A
30%
1 Menu Button
Press Menu button to cycle through
parameters that can be set.
2 Parameter Display
1
3 Setting Display
4 Encoder
Rotate Encoder to adjust parameter
setting.
.
Parameter automatically returns
to amperage setting 15 seconds
after Encoder is inactive.
Amperage Control:
Controls the welding amperage output. Limits the
maximum output of a remote amperage device.
[DIG]* Arc Force Control:
Controls the amount of additional amperage at low
voltage (short arc length) conditions. Adjust the
force of the arc for different joint configurations and
electrodes. Range is OFF−100%. Features
PRO-Set values for both 6010 and 7018 electrodes
*PRO−SET provides PROfessionally developed
SETtings for the weld process. To use PRO−SET,
press the menu button to display the parameter and
adjust the encoder until PRO−SET flashes on the dis-
play. PRO−SET flashes one time and reveals the pro-
fessional setting for the parameter.
*CARB-ARC at one step above DIG's 100% CARBon
ARC Gouging can be selected.
271723-B
OM-270536 Page 49