Miller Dynasty 210 Owner's Manual page 19

V
>60s
= < 60°
Notes
.
A complete Parts List is available at www.MillerWelds.com
V
V
Become trained and read the instructions before working on the
machine or welding.
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait 60 seconds
after power is turned off before working on unit, AND check input ca-
pacitor voltage, and be sure it is near 0 before touching any parts.
Always lift and support unit using both handles. Keep angle of lifting
device less than 60 degrees.
Use a proper cart to move unit.
Welding current creates an electric and magnetic field (EMF)
around the welding circuit and welding equipment.
Safe40 2012−05
Safe42 2017−04
Safe44 2012−05
Safe72 2012−06
OM-270536 Page 11