Miller Dynasty 210 Owner's Manual page 18

Do not weld on drums or any closed containers.
Do not remove or paint over (cover) the label.
When power is applied failed parts can explode or cause other parts to explode.
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Always wear long sleeves and button your collar when servicing unit.
After taking proper precautions as shown, connect power to unit.
Disconnect input plug or power before working on machine.
Do not use one handle to lift or support unit.
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Environmental Protection Use Period (China)
OM-270536 Page 10
.
A complete Parts List is available at www.MillerWelds.com
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Safe16 2017−04
Safe20 2017−04
Safe26 2012−05
Safe27 2012−05
Safe28 2012−05
Safe29 2012−05
Safe30 2012−05
Safe31 2017−04
Safe37 2017−04
Safe123 2016−06
Safe38 2012−05