Expert Menu (Tig); Ignition Current; Pulse Frequency - EWM Pico 180 puls Operating Instructions Manual

Display
More parameters can be set in the Expert menu > see 5.3.6 chapter.
5.3.6

Expert menu (TIG)

The Expert menu has adjustable parameters stored that don't require regular setting. The number of
parameters shown may be limited, e.g. if a function is deactivated.
Display
099-002003-EW501
02.03.2017
Setting/selection
Pulse welding (average value pulses)
------- Function switched on
------- Function switched off (ex works)

Pulse frequency

ENTER
Setting/selection
Ignition current (as percentage, dependent on main current)
Design and function
Figure 5-19
Figure 5-20
TIG welding
EXIT
29