Part Of The Complete Documentation; Safety Instructions - EWM Pico 180 puls Operating Instructions Manual

2.2

Part of the complete documentation

These operating instructions are part of the complete documentation and valid only in
combination with all other parts of these instructions! Read and observe the operating
instructions for all system components, especially the safety instructions!
The illustration shows a general example of a welding system.
Item Documentation
A.1 Power source
A.2 Remote control
A.3 Welding torch
A Complete documentation
2.3

Safety instructions

Risk of accidents due to non-compliance with the safety instructions!
Non-compliance with the safety instructions can be fatal!
• Carefully read the safety instructions in this manual!
• Observe the accident prevention regulations and any regional regulations!
• Inform persons in the working area that they must comply with the regulations!
Risk of injury from electrical voltage!
Voltages can cause potentially fatal electric shocks and burns on contact. Even low
voltages can cause a shock and lead to accidents.
• Never touch live components such as welding current sockets or stick, tungsten or wire
electrodes!
• Always place torches and electrode holders on an insulated surface!
• Wear the full personal protective equipment (depending on the application)!
• The machine may only be opened by qualified personnel!
099-002003-EW501
02.03.2017
Part of the complete documentation
Figure 2-1
WARNING
For your safety
7