Aastra 5380 User Manual page 131

Activating/deactivating functions by remote control
You are not at your desk and want to set various functions on your phone from a dif-
ferent phone.
You can activate/deactivate many of your phone's functions by remote control from a
different internal phone. Remote control has to be enabled for your phone in the sys-
tem.
The remote control is initiated using a special function code. You can then enter the
function commands and function codes.
<Function code>
Aastra 5380/Aastra 5380ip
eud-1282/1.3 – R3.0 – 04.2013
Using remote control from a third-party phone:
1. Enter function code #06.
2. Enter your phone number.
3. Enter your PIN.
4. Enter the function code for activating/deactivating the function you want.
Pick up the handset.
➔
You hear the acknowledgement tone.
Put the handset on-hook.
➔
The function is activated/deactivated.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter "Changing the
(see "User's Guide Function Codes" on the
ten your PIN, your system administrator can reset it to the default setting.
Operator phone
PIN", page 98 or use the function code *47
Aastra DocFinder). If you have forgot-
131