Kernau KFRC 20163 NF EB User Manual page 51

PART - 6. BEFORE CALLING YOUR AFTER SALES SERVICE
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels or
if a problem occurs with the appliance. SR Alarm indicator (
ERROR TYPE
MEANING
WHY
WHAT TO DO
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected ,
• The socket is not sufficient. To check this, plug in another appliance that you know which
is working into the same socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance ,
• The fridge temperature set to MAX.
• The door is closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
If your fridge is operating too loudly;
Normal Noises
Cracking (Ice cracking) Noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking: Heard when the thermostat switches the compressor on/off.
Compressor noise:
• Normal motor noise: This noise means that the compressor is operating normally.
• The compressor may cause more noise for a short time when it is first activated.
Bubbling noise and splash:
• This noise is caused by the flow of the fridge freezer in the tubes of the system.
If you hear any other noises check that:
- The appliance is level
- Nothing is touching the rear of the appliance
( ! ) SR alarm indicator
"Failure" Warning
There is/are some part(s) out of order or there is a failure in the cooling process.
The product is plugged for the first time or a long-time power interruption for 1 hour.
Check the door is open or not and check if the product working 1 hour. If the door is not
open and the product had worked 1 hour, call service for assistance as soon as possible.
) is displayed in the control panel.
EN -48-