Introduction And Safety Norms; General Safety Regulations - lamber MATIC-M-MA Series Instruction Manual

1 - INTRODUCTION
AND SAFETY NORMS
INTRODUCTION
- The noise of the machine running empty, measured at the working positions (fig. 1) and at 1.6m
from the floor, is the following:
Leq A Level equivalent of
sound pressure dB(A)
Attention! In case of high level noise exposure use head-protection for ears !
The level of peak sound pressure Lpc is not declared as it is much inferior to 130dB(C):
1.1 PRELIMINARY OBSERVATION
Carefully read the instructions reported in the present user manual, as it gives important
indications about safety of installation, operation and maintenance:
- carefully keep the present manual for further consultations;
- the illustrations and drawings showing the machine are intended for general reference only
and are not necessarily accurate in every particular;
the dimensions and characteristics of the machine, given in this Manual, are not to be
-
considered binding and may be changed without prior notice;
- having removed the packing material, check that all the equipment is present. If there is any
doubt, do not use it and contact qualified personnel. The packing elements (plastic bags,
nails, etc.) should be kept away from children, because they are dangerous.
This equipment is destined only to the use it has been conceived for: tableware washing
such as dishes, glasses, cups, cutlery, trays, etc. Using it to wash machine components or
objects whose dimensions are superior to the machine working passage is improper and
therefore dangerous.

1.2 GENERAL SAFETY REGULATIONS

THIS SAFETY CODE HAS BEEN COMPILED IN YOUR INTEREST. Strict adherence to these rules will
reduce the risks of injury both to yourself and to others;
Personnel working with this machine must adhere strictly to all statutory safety regulations as well as the
specific rules listed below. Failure to do so may result in personal injury and damage to the machine;
position 1
74
1
position 2
68
2
position 3
74
3