Polycom ReadiVoice Provisioning Manual page 40

ReadiVoice Provisioning Guide
Field/Setting
Conference Entry with
Count
Operator Request
Available
Conference Term
Option
Conference Term
Time
30
Table 2-6 Provisioning options settings (continued)
Description
On — Upon entering the conference, participants hear a private
message telling them how many people, including themselves, are now
in the conference.
Off — Participants hear a message stating only that they're being
placed into conference.
Specifies who may make operator requests from the subscriber's
conferences: the subscriber only, the subscriber and participants, or
neither.
This setting doesn't affect automatic operator requests resulting from a
caller's failure to enter the correct password or conference security
code.
Specifies how the ReadiVoice system handles conferences that have
the minimum number of participants:
Off — The ReadiVoice system never terminates conferences.
On — After a configurable interval (set by Conference Term Time,
below), the conference is referred to an operator for termination. If no
operator is available, the system plays a message to the conference
asking the participants to press a touchtone key to continue. If there's no
response, the system terminates the conference.
On – w/ Oper Override — The system plays a message to the
conference asking the participants to press a touchtone key to continue.
If there's no response, the system terminates the conference.
Ask your system administrator what the minimum number of participants
is for your system.
Specifies the time interval (in minutes) that governs the automatic
termination of conferences that have the minimum number of
participants. Has no effect if Conference Term Option is set to Off. Ask
your system administrator what value to specify.
Proprietary & Confidential