Figure 2-5 Confirmation That Subscriber Was Added - Polycom ReadiVoice Provisioning Manual

Proprietary & Confidential
Set up the conferencing options and features in the Conference Options
7
area. See "Conference Options"
When all information is complete, click Commit Subscriber Changes at
8
the bottom of the page.
If you selected Auto Assign and a routing list that has more than one
number group associated with it, an intermediate dialog box appears
asking you to select a number group.
For more information about routing lists and number groups, see
Assign, Subscriber Groups, Routing Lists, and Number Groups"
page 23.
If necessary, select the number group to which the subscriber should be
9
assigned.
10 Click Commit Subscriber Changes.
If any information is missing or incorrect, the ReadiVoice system tells you
what the problem is.
11 If the update fails, note the problem. Then click the link to return to the
New Subscriber page, make the needed corrections, and click Commit
Subscriber Changes again.
If the update is successful, the ReadiVoice system confirms that the
subscriber has been added and displays the new subscriber's information.
Figure 2-5 shows an example.
12 Give the subscriber this information.
Figure 2-5 Confirmation that subscriber was added
Subscriber Provisioning Tasks
on page 26.
"Auto
on
19