Polycom ReadiVoice Provisioning Manual page 38

ReadiVoice Provisioning Guide
Field/Setting
Waiting Room
Password Enable
Name Record
Entry/Exit
Announcement
28
Table 2-5 Account and roll call options settings (continued)
Description
Setting:
Off — The waiting room isn't available. If the subscriber locks a
conference, callers after that are told that the conference is locked and
are disconnected.
On — The waiting room is available. If the subscriber locks a
conference, callers after that must wait on music hold to be admitted.
The subscriber is notified when someone wants to enter the conference
and can use touchtone commands or the Moderator interface to speak
with, admit, or disconnect the waiting caller(s).
On w/Waiting Room on Entry — Conferences start locked with the
waiting room available. All callers must wait to be admitted by the
subscriber.
Subscriber Configurable:
Yes — The subscriber can change the default setting for the account,
affecting all future conferences.
No — The subscriber can't change the default. If the subscriber locks
the current conference, the waiting room either is or isn't available,
depending on the setting for this feature.
Determines whether the subscriber can change his or her subscriber
password using the touchtone interface.
Setting:
On — The ReadiVoice system prompts participants to record their
names before placing them into conference. Conferees can request a
"roll call" of participants' names during the conference. This feature must
be turned on if Entry/Exit Announcement is set to Name.
Off — The ReadiVoice system doesn't record participants' names. The
Entry/Exit Announcement setting can't be Name.
Subscriber Configurable:
Yes — The subscriber can change the On/Off setting for the account,
affecting all future conferences.
No — The subscriber can't change the On/Off setting.
Setting:
Specifies whether the system signals the entry and exit of a participant
by playing a tone, the participant's recorded name, or silence. If you
select Name, you must also turn on the Name Record feature.
Subscriber Configurable:
Yes — The subscriber can change the announcement setting for the
account, affecting all future conferences. If the announcement setting is
Name, and if the subscriber can turn off Name Record, then the
subscriber should be able to change the announcement setting, too.
No — The subscriber can't change the default.
Proprietary & Confidential