Table 2-5 Account And Roll Call Options Settings - Polycom ReadiVoice Provisioning Manual

Field/Setting
Auto Continuation
Quick Start
Listen Only Entry
Proprietary & Confidential
Table 2-5 Account and roll call options settings
Description
Setting:
On — By default, conferences begin with continuation turned on (which
means the conference continues until the last participant disconnects).
Off — By default, conferences begin with continuation turned off (which
means that the conference ends when the subscriber disconnects).
Subscriber Configurable:
Yes — The subscriber can change the On/Off setting before a
conference begins through the account options menu (if available) or
the Moderator interface.
No — The subscriber can't change the On/Off setting.
The Conference Continuation setting (see
determines whether the subscriber can override the default continuation
behavior for the current conference.
If you set Subscriber Configurable to No and Conference
Continuation to No, then the subscriber can neither change the default
behavior nor override it; the Auto Continuation Setting (On or Off)
governs all of the subscriber's conferences. See
Settings Interact"
Setting:
On — By default, conferences start as soon as the first participant dials
in. Participants don't wait on hold for the subscriber to arrive.
Off — By default, conferences start when the subscriber arrives.
Participants who dial in before the subscriber wait on music hold until
the subscriber arrives.
Subscriber Configurable:
Yes — The subscriber can change the On/Off setting before a
conference begins through the account options menu (if available) or
the Moderator interface.
No — The subscriber can't change the On/Off setting.
Quick start conferences are considerably less secure than conferences
that don't start until the subscriber enters the subscriber password.
Setting:
On — Conferences start in listen only mode. The subscriber is the only
conference participant who can speak to the conference; all other
participant lines are muted, and participants can't unmute themselves.
Off — Conferences don't start in listen only mode. All participants
(except those who are muted) can be heard.
Subscriber Configurable:
Yes — The subscriber can change the On/Off setting for the account,
affecting all future conferences.
No — The subscriber can't change the On/Off setting. But, the
subscriber can still use the Moderator interface or touchtone commands
to turn listen only mode on or off in the current conference.
on page 31.
Subscriber Provisioning Tasks
Table 2-6 on page 29)
"How Continuation
27